Прошивка от 29.10.2010 v1.08.52 - На новом ядре!!!ВНИМАНИЕ!!! НАЧИНАЯ С ЭТОЙ ПРОШИВКИ ТЕПЕРЬ НЕ БУДЕТ 2-Х ВЕРСИЙ ПРОШИВОК IRD и FAC. БУДЕТ ТОЛЬКО FAC!!!
ВСЕ ДОПОЛНИТЕЛЬНЫЕ ФУНКЦИИ БУДУТ ДОБАВЛЯТЬСЯ ТОЛЬКО С ПОМОЩЬЮ ПЛАГИНА.
ПЕРЕД УСТАНОВКОЙ НОВОЙ ВЕРСИИ РЕКОМЕНДУЕМ УДАЛИТЬ ВСЕ УСТАНОВЛЕННЫЕ РАНЕЕ ПЛАГИНЫ И СДЕЛАТЬ СБРОС В ЗАВОДСКИЕ УСТАНОВКИ.
ТЕСТИТЬ НОВУЮ ПРОШИВКУ РЕКОМЕНДУЕМ ПОКА ТОЛЬКО ТЕМ У КОГО ЕСТЬ ВОЗМОЖНОСТЬ ВОССТАНОВЛЕНИЯ РЕСИВЕРА ЧЕРЕЗ КОМ ПОРТ С ПОМОЩЬЮ ПОРТЕР-ЕКСПРЕСС!!!
ЕСЛИ ВАС УСТРАИВАЕТ РАБОТА ПРЕДЫДУЩИХ ВЕРСИЙ - НЕ ТОРОПИТЕСЬ ОБНОВЛЯТЬСЯ НА ЭТУ БЕТА - ВЕРСИЮ - ПОКА БОЛЕЕ ПРОДВИНУТЫЕ ПОЛЬЗОВАТЕЛИ ЕЕ НЕ ОТТЕСТИРУЮТ. ЕСЛИ ЖЕ ВЫ ОБНОВИТЕСЬ И БУДУТ ПРОБЛЕМЫ - НЕ ПИШИТЕ ЗДЕСЬ ГНЕВНЫХ ОТЗЫВОВ - ВАС ПРЕДУПРЕДИЛИ!!СБРОС В ЗАВОДСКИЕ ОБЯЗАТЕЛЬНО!!!1. Исправлен сброс настроек сети при перезагрузке ресивера
2. добавлена поддержка Multi-Pic
3. Исправлены некоторые проблемы воспроизведения файлов TS
4. Добавлен и обновлен норвежский язык
5. Устранена проблема поиска близких транспондеров (в частности для Индийских каналов)
Плагин для нового программного обеспечения (присутствует)Инструкция по плагину (пока на английском )
Follow the process as described below;
<Plugin downloading>
* Use this plugin (plugin_29OCT2010) with FAC v.1.08.52 or later.
1. Unzip plugin_ddmmmyyyy.zip.
2. Copy "plugin" folder to a USB storage.
The folder name should be "plugin" without change, otherwise the PVR cannot recognize it.
3. Connect the USB storage to the PVR during Live Watching.
4. When download pop-up window appears, please find "plugin" folder with Right/Left button of RCU.
5. Download the "plugin" to the PVR.
6. Download completes, the PVR will be rebooted automatically.
<plugin Menu>
Go to Menu > Utilities > PlugIn, you can see the menu as below;
1. MCAS (Multi CAS, Univiersal CAS)
: you can set the State of Mcas "started/null", and set Start Type "Manual/Auto".
If you set Start Type to "Auto" and set State to "started", MCAS will start automatically when the PVR turns on.
If you set Start Type to "Manual", you can start/stop it manually in that menu.
It is also a server for Home Network Sharing (refer to the explanation at the bottom).
2. Mclient : client for Home Network Sharing (refer to the explanation at the bottom).
3. Keditor (Key editor) : you can edit key for normal CAS.
4. Coconut : Key editor for Biss and const CW (newly added in this version).
If you input only key without SID, TSID, ONID, the key will find a matching Biss service automatically.
If a channel is Biss scrambling only sometimes, the key, SID, TSID, ONID should be input altogether.
5. XcamConfigure : you can input and edit c/s information.
Once you input server URL, it will be displayed as ***** for protection, and you can see it by pressing 1407.
6. Xcamclient : you can set the State of C/S "started/null", and set Start Type "Manual/Auto".
If you set Start Type to "Auto"and set State to "started", C/S will start automatically when the PVR turns on.
If you set Start Type to "Manual", you can start/stop it manually in that menu.
After input and edit C/S information via XcamConfigure, you can start it by Xcamclient "started"
** Press Ў°0Ў± (otherwise Ў°EXITЎ± & Ў°0Ў±)in Live watching mode, you can see Xcam info box.
After getting Xcam info box, you can select CAID of the service with UP/DOWN key.
It is similar function with cccam.prio.
7. ExSIM : You can connect external modules which is using twin protocol, Y4, KNJ... (start > OK button > Set the module)
Satellite module "A" is for twin protocol and Satellite module "B" is for Y4.
Ethernet module is for KNJ.
8. Kain2r : This is s/w module for KNJ, you can use it just like cc***.
1. Select Kain2r.
2. Start it with Green button.
3. After Started, press OK button.
4. Pop-up menu will appear.
5. Select <registration> at the bottom of the Pop-up menu.
6. Select Server Address and press 1407.
7. Input
http://www.dragonlink.biz and press enter in the on-screen keyboard.
8. Go to Registration Key and input 25digit key, and press enter in the on-screen keyboard.
9. Status: "Connecting > Conneted to the server / expire date" will be shown.
10. Go to the live channel (pls. refer to the channel list)
The key is safe even after factory reset, and one 25digit key can be used in only one PVR.
------------------------
<Home Network Sharing>
You can use Home Network Sharing from this plugin with Mcas and Mclient.
Both Server and Client receiver need to be connected by internet.
Server receiver and client receiver have to have the same Gate way address to share card key data within Home Network.
Mcas - server side
1. make started by Green button and then press OK button
2. you will see Ў®smart card 2ЎЇ and Ў®server settingЎЇ menu if your receiver has smart card inside
3. enter Ў®server settingЎЇ menu by press OK
4.Ў®portЎЇ : donЎЇt need to change port and it is better to leave as default, but you can change it as 5 digits if you need and it is safe.
5.Ў®user settingЎЇ : you can input user id and password to allow connecting to server receiver from client which is listed inside user setting menu.
6.Ў®auto startЎЇ : you can change as Ў®onЎЇ if you want to start this server menu when you start Mcas plugin
7. login confirmation : you can change as Ў®onЎЇ if you want to check user id and password from client receiver
Mclient - client side
1. make started by Green button and then press OK button
2. there is a input space for server address (IP address of server receiver), port, user id, password
3. To edit server address, you need to press your own master key (1407 if there is no change) then input the IP address of server receiver (no need //)
4. lastly, go to the Ў®connect to serverЎЇ and press Ў®OKЎЇ button
