Никак не могу настроить данный ресивер. До этого с линуксовыми не приходилось общаться. В общем в логах пишет следущее:
Feb 14 00:43:28 192.168.1.13 [mg3] service 130 index 3 pmt pid 0 (2)
Feb 14 00:43:28 192.168.1.13 CaPID: 0x0028 ProvID: 000000
Feb 14 00:43:28 192.168.1.13 CaPID: 0x0031 ProvID: 000000
Feb 14 00:43:28 192.168.1.13 [mg3] network can't decode
Feb 14 00:43:28 192.168.1.13 [mg3] pid 0x0028 failed to decode.
Feb 14 00:43:28 192.168.1.13 [mg3] network can't decode
Feb 14 00:43:28 192.168.1.13 [mg3] pid 0x0031 failed to decode.
Feb 14 00:44:06 192.168.1.13 [mg3] stoping camd..
Feb 14 00:44:06 192.168.1.13 [mg3] service 12F index 3 pmt pid 0 (2)
Feb 14 00:44:06 192.168.1.13 CaPID: 0x0028 ProvID: 000000
Feb 14 00:44:06 192.168.1.13 CaPID: 0x0031 ProvID: 000000
Feb 14 00:44:06 192.168.1.13 [mg3] network can't decode
Feb 14 00:44:06 192.168.1.13 [mg3] pid 0x0028 failed to decode.
Feb 14 00:44:06 192.168.1.13 [mg3] network can't decode
Feb 14 00:44:06 192.168.1.13 [mg3] pid 0x0031 failed to decode.
Feb 14 00:44:54 192.168.1.13 STAPI filter set error 81 pid 31
Feb 14 00:46:07 192.168.1.13 [mg3] stoping camd..
Feb 14 00:46:08 192.168.1.13 [mg3] service A index 3 pmt pid 0 (2)
Feb 14 00:46:08 192.168.1.13 CaPID: 0x0079 ProvID: 000000
Feb 14 00:46:08 192.168.1.13 CaPID: 0x0078 ProvID: 000000
Feb 14 00:46:08 192.168.1.13 [mg3] network can't decode
Feb 14 00:46:08 192.168.1.13 [mg3] pid 0x0079 failed to decode.
Feb 14 00:46:08 192.168.1.13 [mg3] network can't decode
Feb 14 00:46:08 192.168.1.13 [mg3] pid 0x0078 failed to decode.
Feb 14 00:46:33 192.168.1.13 [mg3] stoping camd..
Feb 14 00:46:34 192.168.1.13 [mg3] service 14 index 3 pmt pid 0 (2)
Feb 14 00:46:34 192.168.1.13 CaPID: 0x0022 ProvID: 000000
Feb 14 00:46:34 192.168.1.13 CaPID: 0x0024 ProvID: 042740
Feb 14 00:46:34 192.168.1.13 CaPID: 0x0027 ProvID: 042700
Feb 14 00:46:34 192.168.1.13 [mg3] network can't decode
Feb 14 00:46:34 192.168.1.13 [mg3] pid 0x0022 failed to decode.
Feb 14 00:46:34 192.168.1.13 [mg3] No viaccess key(s) found for id 42740 keynr 08
Feb 14 00:46:34 192.168.1.13 [mg3] network can't decode
Feb 14 00:46:34 192.168.1.13 [mg3] pid 0x0024 failed to decode.
Feb 14 00:46:35 192.168.1.13 [mg3] No viaccess key(s) found for id 42700 keynr 08
Feb 14 00:46:35 192.168.1.13 [mg3] network can't decode
Feb 14 00:46:35 192.168.1.13 [mg3] pid 0x0027 failed to decode.
Feb 14 00:47:14 192.168.1.13 [mg3] stoping camd..
ignore.list, priority.list и replace.list взяты с этого форума.
В newcamd.list следущее:
CWS_KEEPALIVE = 300
CWS_MULTIPLE = xsharing.dyndns.tv 10010:10015 mat8c2 *** 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Пробовал и так:
CWS_CONNECT_TIMEOUT = 600
CWS_KEEPALIVE =720
CWS = 88.198.10.149 10010 mat8c2 *** 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 88.198.10.149 10012 mat8c2 *** 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 88.198.10.149 10015 mat8c2 *** 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Короче, никак не хочет показывать. Подскажите, пожалуйста, в чем может быть причина.
P.S. В родном 980м все куда проще))